Olympus DP80 - Image Acquisition Procedure; Brightfield Observation Workflow

DP80
27
5 IMAGE ACQUISITION PROCEDURE
Brightfield Observation
Set up the microscope.
Perform framing and focusing.
Set the exposure mode.
Move the area and correct
exposure.
Adjust the white balance.
(using the
color modes
)
Record an image.
Select the area (30%, 1%,
0.1%, full-image).
Set the exposure time.
Exposure mode?
Manual
Auto
Save the image.
Fine-adjust the exposure time.
Exposure mode?
Manual
Auto
For the details, refer to the Instruction Manual or Help of the software you will use.
Adjust the white balance.
(using the
color modes
)
Reconfirmation / fine adjustment as required
Set the Color/Monochrome
mode.