Olympus DS-5000 - Setting Recording Destination

24
1
Setting Recording Destination (Card Select)
Setting Recording Destination
By default, the recording destination is set to
the [SD Card] at the factory. To change the
recording destination, follow the procedure
outlined below.
1
Select [Card Select] at the [Device Menu]
screen and press OK/MENU or 9
button.
Refer to P.36 regarding each menu item settings.
2
Press the + or
–
button to choose
between [SD] and [micro SD].
3
Press the OK/MENU button to
complete the setup screen.
[SD Card Selected] or [microSD Card Selected]
will light up on the display, and it will return to the
[Device Menu] screen.
If the 0 or F1
(
BACK
)
is pressed, the setting
will be cancelled and it will return to the [Device
Menu] screen.
The recording destination (
or ) that was
set will appear on the display.
4
Press F1
(
BACK
)
or 0 button to return
to the [Main Menu] screen, then press
F1
(
BACK
)
or 0 button again to exit
the setting.
BACK EXIT
Device Menu
Fingerprint
12
Card Select
Beep
Format
USB Class
Time & Date
BACK EXIT
Card Select
SD
microSD Card
Selected
mSD
BACK EXIT
Card Select
SD
micro SD
mSD
025 / 030
FOLDER
PRIOR
INFO
MIKE
E
QP DICT
New File
02 M 10 s
3 H 0 8 M 0 5 s
F1 button
OK/MENU,
+, –,
9, 0 button