Olympus E-M10 Mark IV - 6 Connecting the camera to a computer; Copying pictures to a computer

Connecting the camera to a computer
6
151 EN
6
Copying pictures to a computer
1
Turn the camera off and connect it to the computer.
• The location of the USB port varies with the computer. For details, refer to your
computer’s manual.
2
Turn the camera on.
• The selection screen for the USB connection is
displayed.
• When the camera is connected to a computer
via USB, a dialog should be displayed in the
monitor prompting you to choose a host. If it is
not, select [Auto] for [USB Mode] (P. 133) in
the camera custom menus.
• If nothing is displayed on the camera screen
even after connecting the camera to the
computer, the battery may be exhausted. Use a
full-charged battery.
3
Press FG to select [Storage]. Press the Q
button.
USB
Storage
Exit
Print
MTP
Set
Micro-USB connector
Smaller terminal
USB cable USB port
Connecting the camera to a computer
ON/OFF lever