Olympus E-M10 Mark IV - Adjusting the Degree of the Art Filter Effect (Fine-Tuning); Using [Partial Color]

Shooting
2
53 EN
Adjusting the degree of the art lter effect (Fine-Tuning)
You can adjust the degree of the lter effect for Pop Art I and Soft Focus before taking
pictures.
1
Select [Pop Art I] or [Soft Focus] in the art lter
menu (P. 52).
• The slider will appear on the display.
• Rotate the front dial to ne-tune the art lter.
• Touch controls can also be used.
• The effect is visible in the display.
• To reset the lter effect, press and hold the Q button.
Effect
Off
ART
1
ART
1
Pop Art
Slider
2
Press the Q button.
3
Shoot.
• Press the u button if you want to ne-tune the art lter again.
Using [Partial Color]
Record only selected hues in color.
1
Select [Partial Color I/II/III] in the art lter menu
(P. 52).
• A color ring appears in the display.
Effect
Off
ART
14
ART
14
ColorColor
Partial Color
2
Rotate the front dial to select a color.
• The effect is visible in the display.
• Touch controls can also be used.
3
Press the Q button.
4
Shoot.
• To choose a different color after shooting, press the u button.