Olympus E-M10 Mark IV - 2 Shooting

Shooting
2
25 EN
2
Switching between displays
Shooting
The camera is equipped with an eye sensor, which turns the viewnder on when you
put your eye to the viewnder. When you take your eye away, the sensor turns the
viewnder off and turns the monitor on.
Monitor
Put your
eye to the
viewnder
Viewnder
250250 F5.6
P
S-IS ONS-IS ON
ISO-A
200
1023
1:02:03
L
0.0
F
4K
30p
250250 F5.6
P
1:02:0
3
1023
S-IS ONS-IS ON
ISO-A
200
L
0.0
F
4K
30p
View through lens shown in monitor View through lens shown in viewnder
• If the viewnder is not in focus, put your eye to the
viewnder and focus the display by rotating the
diopter adjustment dial.
Diopter adjustment dial
• You can display the EVF Auto Switch setting menu
if you press and hold the u button. g [EVF
Auto Switch] (P. 137)
• When [Off] is selected for [EVF Auto Switch], you
can switch displays by pressing the u button.
u button
$
• Tilting the monitor disables the eye sensor.