45
EN
Basic photography/frequently-used options
1
Zoom frame AF/zoom AF
You can also zoom in on an area of the image in the monitor and adjust focus.
Choosing a high zoom ratio allows you to use autofocus to focus on a smaller area
than is normally covered by the AF target. You can also position the focus target more
precisely.
L
N
01:02:0301:02:03
3030
250250 F5.6
0.00.0
ISO
200
HD
Shooting display
L
N
01:02:0301:02:03
3030
250250 F5.6
0.00.0
ISO
200
HD
Zoom frame AF Zoom AF
a
a
a
Q
/
a
(Press and hold)
1
Before proceeding, use [Button Function] (P. 86) to assign [a] to a
button.
2
Press the a button to display the zoom frame.
• If the camera was focused using autofocus
just before the button was pressed, the
zoom frame will be displayed at the current
focus position.
• Use FGHI to position the zoom frame.
• Press the INFO button and use FG to
choose the zoom ratio.
Comparison of AF and
zoom frames
14x
10x
7x
5x
3
Press the U button again to zoom in on the zoom frame.
• Use FGHI to position the zoom frame.
• Rotate the dial to choose the zoom ratio.
4
Press the shutter button halfway to initiate autofocus.
• The zoom is cancelled.
• If [mode2] is selected for [LV Close Up Mode] (P. 88), pressing the shutter button will
not cancel zoom and the camera will focus continuously while the shutter button is
pressed halfway.
# Cautions
• Zoom is visible only in the monitor and has no effect on the resulting photographs.
To Next Page
Loading...
