71
EN
Sending and receiving images
6
6
The optional OLYMPUS PENPAL can be used to upload pictures to, and receive
pictures from, Bluetooth devices or other cameras connected to an OLYMPUS
PENPAL. Visit the OLYMPUS website for more information on Bluetooth devices.
Before sending or receiving images, select [On] for [c/# Menu Display] > [# Menu
Display] to make the accessory port menu accessible.
Sending images
Resize and upload JPEG images to another device. Before sending images, make
sure that the receiving device is set to the mode for receiving data.
1
Display the picture you wish to send full frame and press Q.
2
Select [Send A Picture] and press Q.
Select [Search] and press Q in the next dialog.
Bluetooth devices in range, or in [Address Book] will be
displayed.
•
JPEG
Erase
Send A Picture
Back
Set
3
Select the destination and press Q.
The image will be uploaded to the receiving device.
If prompted to provide a PIN code, enter 0000 and
press Q.
•
•
Send Picture
Sending
Cancel
Receiving images/adding a host
Connect to the transmitting device and download JPEG images.
1
Select [OLYMPUS PENPAL Share] in the A tab
of the accessory port menu (P. 90).
2
Select [Please Wait] and press Q.
Perform operations for sending images on the sending
device.
Transmission will start and a [Receive Picture Request]
dialog will be displayed.
•
•
#
2
1
c
OLYMPUS PENPAL Share
OLYMPUS PENPAL Album
Electronic Viewfinder
Back
Accessory Port Menu
Set
3
Select [Accept] and press Q.
The image will be downloaded to the camera.
If prompted to provide a PIN code, enter 0000 and
press Q.
% Tips
To resize images to be transmitted or choose how long
the camera searches for a destination: g “Customizing
camera settings” (P. 81)
•
•
•
Receive Picture
Receiving
Cancel
Sending and receiving images
To Next Page
Loading...
Need help?
General
