DMTA-10083-01EN, Rev. 3, June 2017
Introduction
17
Introduction
The EPOCH 6LT is a portable ultrasonic nondestructive testing (NDT) instrument
designed primarily for inspections requiring high portability, such as rope access, and
detection of flaw conditions in welds, pipes, turbine blades, and other structural and
industrial materials. The instrument can be used both indoors and outdoors.
The EPOCH 6LT offers advanced conventional ultrasonic performance featuring a
large dynamic range and superior measurement resolution. The full color liquid-
crystal display provides a resolution of 640 × 480 pixels with transflective technology
for superior visibility. The software user interface (UI) provides an intuitive way to
access the full functionality of the instrument.
Before you operate the EPOCH 6LT, Olympus recommends that you have a thorough
understanding of the principles and limitations of ultrasonic nondestructive testing
and that you seek adequate training. Olympus assumes no responsibility for incorrect
operational procedure or misinterpretation of test results.
Although the EPOCH 6LT continuously self-calibrates, you must be aware of the
regulatory requirements. Olympus offers calibration and documentation services.
Contact Olympus or your local representative with any special requests.
To Next Page
Loading...
