DMTA-10083-01EN, Rev. 3, June 2017
Package Content
25
To operate the charging base
1. Plug the AC charger/adaptor into the charging base’s input power socket.
2. Align the Li-ion battery contacts with the contacts at the bottom of the charging
base receptacle.
3. Firmly insert the Li-ion battery into the charging base receptacle.
Do not force the Li-ion battery into the charging base receptacle. Make sure that the
battery contacts and receptacle contacts are properly aligned.
4. Leave the Li-ion battery in the charging base until the charging indicator changes
from flashing green to steady green.
1.5.2 Battery Conditioning
You can condition the Li-ion battery to restore it to peak efficiency. Battery
conditioning completely discharges the battery, then recharges it.
Charging base (top)
2 Charging base receptacle
3 Battery charging indicator
4 Battery conditioning button and
discharge indicator
Table 4 EPOCH 6LT charging base (continued)
Component key EPOCH 6LT — All models
To Next Page
Loading...
