DMTA-10083-01EN, Rev. 3, June 2017
Chapter 1
26
To condition the battery
1. Firmly insert the battery into the charging base receptacle.
2. Press and hold the battery conditioning button for three seconds (see Table 4 on
page 24).
After you release the button, the blue discharge indicator begins flashing.
3. Leave the battery in the charging base during the entire discharge/charge cycle:
a) The discharge indicator flashes blue until the battery is fully discharged.
b) The charging indicator flashes green until the battery is fully charged.
c) The charging indicator glows steady green when the discharge/charge cycle is
complete.
To Next Page
Loading...
