DMTA-10083-01EN, Rev. 3, June 2017
Appendix A
48
Corrosion (optional) Zero-cross measurement algorithm, V-Path correction,
Single or Echo-to-Echo
Table 12 Environmental ratings
Parameter Specifications
IP rating Ingress protection engineered to IP67 (dust tight and
water submersion) and IP65 (dust tight and water jets)
per IEC 60529-2004 (Degrees of Protection Provided by
Enclosures – IP Code).
Explosive atmosphere MIL-STD-810F, Method 511.4, Procedure 1
Shock tested MIL-STD-810F, Method 516.5, Procedure I, 6 cycles each
axis, 15 g, 11 ms half sine
Vibration tested MIL-STD-810F, Method 514.5, Procedure I, Annex C,
Figure 6, general exposure: 1 hour each axis
Operating temperature −10 °C to 50 °C (14 °F to 122 °F)
Battery storage temperature 0 °C to 50 °C (32 °F to 122 °F)
Altitude Designed to function safely up to 2000 m
Mains supply voltage fluctuations Designed to function safely at ±10 % of the nominal
voltage
Transient overvoltages Designed to function safely with transient overvoltages
up to the levels of Overvoltage Category II
Temporary overvoltages Designed to function safely with temporary overvoltages
occurring on the mains supply
Pollution degree Designed to function safely at a pollution degree of 2
Table 13 Instrument inputs and outputs
Parameter Specifications
USB ports (1) USB 1.1 Full Speed Host (Type A)
(1) USB 2.0 Full Speed Client (Type Mini B)
Video output 1 digital video output
Table 11 Measurements (continued)
Parameter Specifications
To Next Page
Loading...
