Olympus FL 36R - Page 23

1
2
1
2
23
EN
Using the reflector adapter (optional)
When you use an optional reflector adapter to shoot with bounce flash,
you can divert part of the light toward the subject to reflect it off the
subject. In this way you can achieve a catch-light effect — the light
reflection on people’s eyes. You can also illuminate with the reflector
light parts of the picture that might have been shaded because of the
bounce flash.
Shooting with bounce alone Shooting with reflector adapter
To achieve the catch-light effect, turn the
light-emitting section directly up or directly
sideways and aim the plate towards the
subject.
1 Pass the end with the mark of the
reflector adapter’s belt through the plate
(1) and insert the part of the belt into
the plate (2).
2 Align the flat surface of the plate with
the electronic flash and wrap the belt
around the flash (1). Insert the other
end of the belt firmly into the plate (2).
Plate
Belt
r2067e000cs2j.indb23r2067e000cs2j.indb23 2007/10/0110:49:532007/10/0110:49:53