Olympus IM008 - Assigning Functions to Buttons (Button Function)

Shooting
2
95 EN
Assigning functions to buttons ( Button Function)
At default settings, the following functions are assigned to the buttons:
Button Default
F Function b (Digital Tele-converter)
R Function R REC
To change the function assigned to a button, follow the steps below.
1
Press the u button in P/A/S/M modes.
• In B, ART, SCN, and Z modes, the display of the
LV super control panel is controlled via [K Control
Settings] (P. 122).
2
Use FGHI to select [Button Function], then
press the Q button.
• The custom menu [Button Function] item will be
displayed.
250250 F5.6
P
1023
1:02:03
sRGB
Natural
S - AF
N
FHD
60p
S
Normal
WB
Auto
ISO
Auto
M-IS
S-IS On
A
±
0
± 0.0
±
0
±
0
±
0
G
±
0
Button Function
Button Function
• [Button Function] can also be accessed from the menus (P. 109, 121).
3
Use FG to highlight the desired button and press I.
4
Use FG to highlight the desired function and press the Q button.
5
Press the Q button again to exit.
$ Notes
• The functions assigned to the buttons may be unavailable in some modes.
• The options available vary with the current mode.