154
Chapter 6 Measurement procedures
(2) In stereo measurement images
Object distance is always measured during stereo measurement.
CAUTION
• Object distance measurement cannot be done when recording moving images or when doing
profile measurement.
3 Displaying the measurement results
Measure the object distance at the position of the cursor in the left image.
The object distance indicator shows the distance between the distal end of the
optical adapter and the subject by nine levels.
Up to 15 mm: ← green
Up to 30 mm: ← yellow
30 mm and higher: ← red
4 Moving the measurement point
To move the cursor, tilt the [MEAS/ENTER] joystick in the desired direction.
To Next Page
Loading...
