189
Chapter 10 Specifications
Base unit
Measurement function
Spot ranging • Spot ranging indicates approximate value of
the distance from the tip of the scope to the
object on screen specified by cursor.
• The distance is indicated via numerical value
and color-coded bar.
(Stereo measurement: except for profile)
Recording • It is possible to record up to 3 groups of
measurement results on the measurement
screen.
• When measurement results exist, pressing
and holding the [FRZ/REC] button on the
remote controller records the image together
with the measurement results.
Correction of the specified point It is possible to select and correct specified
points.
(Stereo measurement only)
Restrictions • The image format is TIFF or JPEG (HIGH)
with the stereo measurement and JPEG with
the scaler measurement.
• The object distance measurement result is not
recorded.
• When a retrieved image is measured, stereo
measurement is not available unless the
same measurement environment used for to
capture the image has been register for the
measurement.
• The stereo optical adapter can be used by
registering it as a new stereo adapter setup.
• Recommended measurement range for
stereo measurement up to 15 mm
Possible measurement range up to 30 mm
• Possible to record in a maximum of eight
measurement environments.
Volume Volume adjustment of audio playback and beep
according to menu operations.
Save settings Sets whether the last or default settings are
recalled the next time the system is started up.
Connected to a PC USB cable connection. Contact Olympus for
details.
To Next Page
Loading...
