86
Chapter 4 Basic operations
2 Select “YES AUDIO ON” for recording audio with the movie or
select “YES AUDIO OFF” for recording the movie without audio,
and press the [MEAS/ENTER] joystick.
Moving image recording starts. The screen shows “MOVIE” and a flashing red
dot during recording of a moving image.
3 To stop recording moving images press the [FRZ/REC] button.
When recording the moving image is complete, “MOVIE” and the flashing red dot
disappear from the screen.
NOTE
• Never attempt to insert or remove the recording card or USB memory while recording a
movie. If the recording card or USB memory is removed while recording a movie, movie
recording may stop and display error message.
• Recording stops when the file is 4 GB or if it exceeds the memory capacity. A blank 1-GB
memory card provides about 30 minutes of recording time.
• If you select “NO” in the moving image confirmation window, only the still image is recorded
but the moving image is not recorded.
• You need to connect a microphone in order to record audio with movies.
Recording destination indicato
Recording time
that can be recorded
Recording card
Internal memory
USB memory
To Next Page
Loading...
