110
Chapter 5 Menu operations and functions
Changing the selection of the optical adapter
You can change the stereo optical adapter settings if the set number is incorrect.
1 Press the [MENU/EXIT] button to display the main menu.
2 Select “ADAPTER” and press the [MEAS/ENTER] joystick.
The optical adapter list is displayed.
This list shows registered stereo adapter scope unit combinations as well as all
other optical adapters other than stereo optical adapters.
3 Select the correct set number from the optical adapter list for the
stereo optical adapter that is currently attached and then press the
[MEAS/ENTER] joystick.
To Next Page
Loading...
