113
Chapter 5 Menu operations and functions
Language selection
Sets the menu display language.
You can select from Japanese, English, Spanish, Chinese, Korean, French,
German, Italian or Russian.
NOTE
• Restart takes about a few minutes after the menu display language selection is changed.
1 Press the [MENU/EXIT] button to display the main menu.
2 Select the “SET UP” menu and press the [MEAS/ENTER] joystick.
3 Select “LANGUAGE” and press the [MEAS/ENTER] joystick.
The language selection window is displayed.
Select from English, French, Spanish, Japanese, Korean or Chinese for NTSC.
Select from English, French, German, Italian, Spanish, Russian or Chinese for
PAL.
4 Tilt the [MEAS/ENTER] joystick up, down, left or right to select a
language and push the [MEAS/ENTER] joystick.
5 Now press the [POWER] button to turn off the power. Then press
the [POWER] button again to turn the power on; the menu will be
displayed in the selected language.
To Next Page
Loading...
