107
Chapter 6 Measurement procedures (LX only)
For 8.5-mm type
1 The optical adapters list shown below is displayed when the live
screen is displayed if a stereo optical adapter is attached.
• Stereo optical adapters that have not been entered are highlighted in gray.
2 Select the optical adapter to be used and press the [MEAS/ENTER]
joystick.
• If no stereo optical adapters are entered, it is necessary to execute "NEW
STEREO ADAPTER" and enter a new stereo optical adapter. See “Using a
new stereo optical adapter (NEW STEREO ADAPTER)” (page 108) for details
about operations.
3 The following message is displayed when the stereo optical adapter
is removed.
To Next Page
Loading...