7 Select [YES].
The recording of the movie and the sound starts.
The movie recording in progress icon ( ) blinks on the LCD monitor while the movie
recording is in progress. If you select “NO” in the movie recording confirmation dialog, only
the still image is recorded and the movie is not recorded.
If you select “CONTINUE” in the movie recording confirmation dialog, the movie is recorded
and added to the movie that was previously recorded. For details, refer to “Appending the
movie” (page 47).
Short-pressing the [FRZ/REC] button during movie recording allows you to record still
images.
Pressing the [MEAS/OK] joystick during movie recording allows you to append an index
mark.
By adding index marks, you can skip backward and forward to the marked positions when
playing back or pausing the movie.
8 Long-press the [FRZ/REC] button to exit the movie recording.
The blinking movie recording in progress icon ( ) disappears when the movie recording
is complete.
TIP
●
If the “FILE NAME MARK” menu is set to “OFF”, Steps 3 to 5 will be skipped.
●
Audio recording is possible when a headset (commercially available) is connected with the
STILL AUDIO menu set to “ON”.
●
The movie recording stops automatically whenever the SDHC card becomes full or when
the file size reaches 4 GB.
4
Appending the movie
You can append the movie to the movie that was recorded last.
Selecting “CONTINUE” in the movie recording confirmation dialog enables to add the movie to
the movie that was recorded last. If the SDHC card is inserted or removed, or the [VIEW] button
is pressed, or the folder is changed between the image recording folder and the playback folder,
“CONTINUE” cannot be selected.
IPLEX G Lite
47
To Next Page
Loading...