Olympus Mju 1050 SW - Page 43

43 EN
Make the settings for the functions while referring to “Using the Menu” (p. 3).
Viewing the image immediately after shooting [REC VIEW]
xSETUPRECVIEW
Submenu 2 Application
OFF
Theimagebeingrecordedisnotdisplayed.Thisallowstheusertoprepareforthenext
shotwhilefollowingthesubjectinthemonitoraftershooting.
ON
Theimagebeingrecordedisdisplayed.Thisallowstheusertomakeabriefcheckofthe
imagethatwasjusttaken.
 Evenwhensetto[ON],youcanresumeshootingwhiletheimageisbeingdisplayed.
Selecting the camera sound and its volume [SOUND SETTINGS]
xSETUPSOUNDSETTINGS
Submenu 2 Submenu 3 Submenu 4 Application
BEEP
SOUNDTYPE 1/2
Selectstheoperatingsoundandvolume
ofthecamerabuttons(excepttheshutter
button).
VOLUME
OFF(Nosound)/
LOW/HIGH
SHUTTERSOUND
SOUNDTYPE
1/2/3
Selectstheoperatingsoundandvolumeof
theshutterbutton.
VOLUME
OFF(Nosound)/
LOW/HIGH
8
OFF(Nosound)/
LOW/HIGH
— Adjuststhewarningsoundvolume.
qVOLUME
OFF(Nosound)/
LOW/HIGH
— Adjuststheimageplaybackvolume.
 Toturnoffallsoundsatonce,makethesettingfrom[j SILENT MODE] (p. 49).