Olympus Mju 1050 SW - Page 44

44 EN
Resetting the le name numbers of
pictures [FILE NAME]
xSETUPFILENAME
Month:1toC
(A=October,
B=November,
C=December)
Day:01to31
Pmdd
Foldername Foldername Filename
DCIM 100OLYMP
999OLYMP
Pmdd0001.jpg
Pmdd9999.jpg
Automatic
numbering
Automatic
numbering
Submenu 2 Application
RESET
Thisresetsthesequentialnumber
forthefoldernameandlename
wheneveranewcardisinserted.
*1

Thisisusefulwhengrouping
imagesonseparatecards.
AUTO
Evenwhenanewcardisinserted,
thiscontinuesthenumberingfor
thefoldernameandlenamefrom
thepreviouscard.Thisisusefulfor
managingallimagefoldernames
andlesnameswithsequential
numbers.
*1
 Thenumberforthefoldernameisresetto100,and
theoneforthelenameisresetto0001.
Adjusting the CCD and adjusting the
image processing function
[PIXEL MAPPING]
xSETUPPIXELMAPPING
 Thisfunctionhasalreadybeenadjusted
atfactoryshipping,andnoadjustmentis
neededrightafterpurchase.Approximately
onceayearisrecommended.
 Forbestresults,waitatleastoneminute
aftertakingorviewingpicturesbefore
performingpixelmapping.Ifthecamerais
turnedoffduringpixelmapping,besureto
performitagain.
To adjust the CCD and to adjust the
image processing function
Presstheobuttonwhen[START]
(submenu2)isdisplayed.
ThecamerachecksandadjuststheCCDandthe
imageprocessingfunctionatthesametime.
●