Olympus Mju 1050 SW - Page 46

46 EN
Using the alarm [ALARM CLOCK]
xSETUPALARMCLOCK
 When[X]hasnotbeenset,[ALARMCLOCK]isnotavailable.
 When[jSILENT MODE] (p. 49)issetto[ON],thealarmwillnotsound.
 When[DUALTIME] (p. 45)issetto[ON],thealarmisactivatedatthedateandtimesetin
[DUALTIME].
Submenu 2 Submenu 3 Submenu 4 Application
OFF — —
Thealarmiscanceled.
ONETIME
TIME
(Proceedsto
thetimesetting
screen
*1
.)
Thealarmisactivatedonceaccordingtothe
selectedtime,soundandvolumesettings.
SNOOZE
*2
OFF/ON
SOUNDTYPE
1/2/3
VOLUME LOW/HIGH
DAILY
(Submenus3and4canbesetinthe
samewayas[ONETIME].)
Thealarmisactivateddailyatthesamesettings.
*1
 Thesettingprocedureisidenticaltothatin“Setting the date and time” (p. 13).
*2
 Inthissetting,evenifthealarmisstoppedonce,itwillbeactivatedevery5minutes,upto7times.
 Tocheckthealarmtime,pressthegbuttonwhilethecameraisturnedoff.Thecurrentand
alarmsettimesaredisplayedforapprox.3seconds.
To activate the alarm To stop the alarm
Aftermakingthedetailedsettingsof[ONE
TIME]or[DAILY],presstheo buttonto
turnoffthecamera.
Whenthealarmisactivated,pressanybutton
tostopthealarmandturnoffthecamera.
 When[SNOOZE]issetto[OFF],thealarm
stopsautomaticallyandthecameraturnsoff
after1minuteofnooperation.
Selecting the video signal system to match your TV [VIDEO OUT]
xSETUPVIDEOOUT
 TheTVvideosignalsystemvariesdependingonthecountriesandregions.Beforeviewingcamera
imagesonyourTV,selectthevideooutputaccordingtoyourTV’svideosignaltype.
Submenu 2 Application
NTSC ConnectingthecameratoaTVinNorthAmerica,Taiwan,Korea,Japan,andsoon
PAL ConnectingthecameratoaTVinEuropeancountries,China,andsoon
 Thefactorydefaultsettingsdifferaccordingtotheregionwherethecameraissold.