To Next PageTo Next Page
Need help?Do you have a question about the Olympus MX61 and is the answer not in the manual?
General| Focusing | Coarse and fine focusing knobs |
|---|---|
| Type | Metallurgical Microscope |
| Magnification | 50x to 1000x |
| Illumination | Reflected (epi) illumination |
| Camera Compatibility | Compatible with various Olympus cameras and third-party options |
| Eyepiece | 10x |
Essential safety guidelines for operating the microscope, covering power cord usage and shock hazards.
Guidelines for microscope installation space and safety, including vibration resistance and cable management.
Points for safe operation, including toppling prevention and grounding.
Explains symbols and cautions found on the microscope for safe usage.
Visual guide showing module placement for assembly.
Step-by-step instructions for assembling microscope components.
Details modules pre-installed and adjusted by Olympus.
Steps to safely turn on the mercury or xenon burner.
Procedure for centering the mercury burner's arc image.
Detailed steps for precise adjustment of the mirror position.
Parameters, cable connection, and pin assignments for RS-232C control.
Details command/response types and remote/local modes.
Comprehensive list and details of available computer control commands.
Details connector used and pin layout for nosepiece control.
Specifies control conditions and position numbers for the revolving nosepiece.
