Olympus MX63 - User Manual

Instructions
Notes
This instruction manual is for the Olympus microscope.
To ensure safety, obtain optimum performance and to familiarize yourself fully with the use of this
product, we recommend that you study this manual thoroughly before operating this product, and
always keep this manual at hand when operating this product.
Retain this instruction manual in an easily accessible place near the work desk for future reference.
For details of products included in the configuration of this microscope, see page 18.
Semiconductor/FPD/Industrial Inspection
Microscopes
MX63/MX63L
Optical Microscope and Accessory

Olympus MX63 Specifications

General

Type	Upright Microscope
Optical System	UIS2 Optical System
Observation Tubes	Binocular, Trinocular
Magnification	50x to 1000x
Condenser	N/A (Reflected Light Only)
Illumination	LED
Focusing	Coaxial coarse and fine focusing knobs
Observation Methods	Brightfield, Darkfield, Polarized Light, DIC

Summary

Introduction to Olympus Microscopes

Configuration of Instruction Manuals

Details manuals provided with the microscope units for proper use.

Intended Use of Microscopes

Describes the product's intended industrial applications for observation and inspection.

Safety Precautions for Microscope Operation

Installation and Handling Safety

Covers safe installation, carrying, and general handling procedures for the microscope.

Electric and Lamp Safety

Addresses risks associated with power, LEDs, and hot lamps during operation.

Prevention of Fire and Injury Hazards

Details measures to prevent fire, personal injury, and electric shock.

Nomenclature of Microscope Units

Main Microscope Components

Identifies the primary parts and modules of the microscope system.

List of Combinable Units

Unit Compatibility Overview

Lists compatible units for various observation methods and configurations.

Observation Procedures

Reflected Light Observation

Step-by-step guide for basic brightfield/darkfield reflected light observation.

Focusing and Brightness Adjustment

Covers focusing mechanisms, tension adjustment, and light intensity control.

Observation Tube Adjustments

Details how to adjust interpupillary distance and diopter for comfortable viewing.

Image Acquisition

Image Acquisition Diagram

Illustrates the setup for capturing images using cameras and adapters.

Observation Methods

Transmitted Light Brightfield Observation

Procedure for brightfield observation using transmitted light illumination.

Reflected Light DIC Observation

Steps for Differential Interference Contrast observation.

Reflected Light Polarization Observation

Procedure for simple polarization observation using reflected light.

Replacement of Optical Parts

Eyepiece Replacement

Instructions for removing, attaching, and replacing eyepieces and micrometers.

Objective Replacement

Procedures for removing and attaching microscope objectives.

Lamp Replacement

Covers replacing halogen bulbs and mercury burners in illumination housings.

Troubleshooting Common Issues

Optical System Problems

Common issues related to optics, illumination, and image visibility.

Electrical and Stage System Issues

Troubleshooting for power, electronic components, and stage movement.

Microscope Specifications

Frame and Tube Specifications

Details on microscope body, observation tubes, and interfaces.

Light Source and Component Specifications

Information on illumination units, lamps, and optical component details.

Optical Performance List

Performance by Objective Series

Table detailing performance characteristics of UIS2 series objectives.

Assembly Procedures

Assembly Diagram and Steps

Visual guide and step-by-step instructions for assembling the microscope.

Attaching Stages and Holders

Instructions for installing stages, wafer holders, and mask holders.

Connecting Light Sources and Cables

Procedures for connecting illumination units and interface cables.

Maintenance and Inspection

Maintenance Parts List

Lists available replacement parts like lamps, filters, and immersion oil.

Preventive Inspection Sheet

Checklist for routine maintenance of illumination devices.

Power Supply Cord Selection

Certified Cord Information

Guidelines for selecting compliant power supply cords based on agency certifications.