112112
4
Attaching the focus aid (MX-FA)
Loosen the clamping screws on the top cover
a
using the Allen wrench (2 mm) to remove the top cover.
Peel off the sticker
b
of the focus aid knob insertion slot.
Push the focus aid unit in back-left direction (arrow direction
d
in the picture) facing from the right side of the
microscope, and secure it using the clamping screws
e
(2 positions).
Clean the place to attach the sticker
f
for focus aid on the side panel using the cleaning paper, etc. moistened with
absolute alcohol, and attach the sticker using the mount hole as a guide.
Insert the focus aid knob
g
from the insertion slot and rotate clockwise to attach it.
Attach the top cover.
1
2
3
4
5
6
a
e
b
f
g
d
To Next Page
Loading...
