Chapter 5 Operation
71
VIDEO SYSTEM OTV-SI
Hue level adjustment
The hue level can be adjusted by navigating through the menu using the remote
control switches or the keyboard (optional).
1. If the video monitor does not display the menu, press the remote control
switch for execution or for selection, the “F1”, “Enter”, “ ”, “ ”, “” or “”
key on the keyboard to display the menu.
2. Press the remote control switch for selection, “” or “” key on the
keyboard and select “NEXT” (see Figure 5.6 on page 57).
3. Press the remote control switch for execution, “Enter” or “ ” key on the
keyboard four times to display the menu shown in Figure 5.7 on page 58.
4. Press the remote control switch for selection, “” or “” key on the
keyboard and select “CONFG.” (see Figure 5.25).
Figure 5.25
To Next Page
Loading...
