Chapter 5 Operation
85
VIDEO SYSTEM OTV-SI
2. To decrease the brightness, press the switch. Each time the switch is
pressed, the menu value on the video monitor decreases, and the
brightness of the endoscopic image decreases one level. Holding down the
switch decreases the brightness continuously.
Using the menu
1. If the video monitor does not display the menu, press the remote control
switch for execution or for selection, the “F1”, “Enter”, “ ”, “ ”, “” or “”
key on the keyboard to display the menu.
2. Press the remote control switch for selection, the “” or “” key on the
keyboard and select “NEXT” (see Figure 5.6 on page 57).
3. Press the remote control switch for execution, the “Enter” or “ ” key on the
keyboard to display the menu bar shown in Figure 5.40.
Figure 5.40
To Next Page
Loading...
