The internal memory and memory card
31
2
Tips before you start taking pictures
1 Make sure the camera is turned
off.
• The power lamp is off.
• The monitor is off.
• The lens is retracted.
2 Slide the card cover lock.
• The card cover opens.
(Inserting the card
3 Orient the card as shown, and
insert it into the card slot as
shown in the illustration.
• Insert the card straight in.
• Insert the card until it clicks into place.
• Inserting the card in the wrong direction
or at an angle may damage the contacts
and prevent the card from being
removed.
• The card may not record properly if it is
not inserted all the way in.
Inserting and removing the card
Monitor
Power lamp
Card cover
1
Card cover lock
2
Notch
Contact area
To Next Page
Loading...
