44
3
Basic shooting functions
Recording movies
This function allows you to record movies.
During recording, the correct exposure is automatically maintained even if
the subject moves, but the focus and zoom are locked. If the distance to
the subject changes, you may lose focus.
1 Compose your picture.
• The remaining recording time is
displayed on the monitor.
• You can use the zoom button to enlarge
your subject.
2 Press the shutter button fully to
start recording.
• Audio is recorded with the movie.
• The card access lamp blinks while the
movie is being saved.
• During movie recording, the A mark
lights red.
3 Press the shutter button again to
stop recording.
• When the remaining recording time has been used up, recording stops
automatically.
• When there is space in the internal memory or the card, the remaining
recording time (P. 27) is displayed, and the camera is ready to shoot.
TIPS
To use the zoom during movie recording
jSet [DIGITAL ZOOM] to [ON]. g“Using the digital zoom” (P. 39)
Note
• The remaining recording time may drop rapidly during recording. Try using the
internal memory or card again after formatting it with your camera.
g“Formatting the internal memory or card (MEMORY FORMAT/FORMAT)”
(P. 83)
•In n mode, the flash is not available.
00:36
To Next Page
Loading...
