Olympus Stylus 800 - Changing the Monitor Display (DISP)

61
4
Additional shooting functions
Changing the monitor display (DISP)
This function displays histograms and lines that help you to compose your
pictures. Also, you can change the amount of information that is displayed
on the screen.
1 Press the DISP button repeatedly.
•Press the DISP button to change the display in the following order.
g“Direct buttons” (P. 11)
TIPS
How to read the histogram
1 If the peak fills too much of the frame, the image will
appear mostly black.
2 If the peak fills too much of the frame, the image will
appear mostly white.
3 The part indicated in green in the histogram shows
the luminance distribution within the AF target mark.
Note
• The histogram displayed during shooting may differ from the histogram
displayed during playback.
44
1/200
1/200
F4.0
F4.0
ISO
ISO
400
400
44 3264
3264
×
2448
2448
HQ
HQ
+2.0
+2.0
1/200
1/200
F4.0
F4.0
ISO 400
ISO 400
44 3264
3264
×
2448
2448
HQ
HQ
+2.0
+2.0
1/200
1/200
F4.0
F4.0
ISO 400
ISO 400
44 3264
3264
×
2448
2448
HQ
HQ
+2.0
+2.0
1/200
1/200
F4.0
F4.0
ISO 400
ISO 400
44 3264
3264
×
2448
2448
HQ
HQ
+2.0
+2.0
Displays horizontal and
vertical lines.
Displays diagonal lines.
Displays the regular
shooting information.
For details on the
information displayed,
see “Monitor
indications” (P. 160).
Displays a histogram
showing the luminance
distribution of the picture.
This screen is not
displayed in n mode.
Displays only basic
information.
1
2
3