Adding sound to still pictures
74
5
Playback
5 Press Z.
• The slideshow starts.
• The slideshow will not stop until you cancel it by pressing Z.
Sound can be added to a still picture that you have already taken. You can
also re-record over the sound that has already been recorded. Total
recording time per picture is approximately 4 seconds.
Select the still picture to which you want to add sound and display the top
menu.
Top menu [MODE MENU] [PLAY] [R] g“Using the menus” (P. 16)
1 Press Y to display [START].
TIPS
• During index display, the slideshow is displayed in index format.
Note
• You are recommended to use the optional AC adapter when running a
slideshow for a long period of time. The camera will enter sleep mode after
about 30 minutes and stop the slideshow automatically.
Adding sound to still pictures
START
PLAY
EDIT
MEM
SET
To Next Page
Loading...
