Flash shooting
42
3
Basic shooting functions
Flash off ($)
The flash does not fire even in low light conditions. Use this mode in situations where
flash photography is not desired or is prohibited. You can also use this mode when
shooting landscapes, sunsets, and other subjects outside the range of the flash.
1 Press O# repeatedly to set the
flash mode.
g“Direct buttons” (P. 11)
• After 2 seconds of non-operation, the
selection is set and the mode selection
screen disappears.
• Each time you press O#, the flash
mode changes in the following order.
•In S mode, the flash mode changes in the following order.
2 Press the shutter button halfway.
• In conditions where the flash will fire, the
# mark lights (flash stand-by).
3 Press the shutter button fully to
take the picture.
Note
• Since a slow shutter speed is automatically selected in low light situations when
in the flash off mode, the use of a tripod is recommended to prevent your
pictures from being blurred by camera movement.
AUTO
44
3264
To Next Page
Loading...
