85
6
Settings
Saving camera settings (ALL RESET)
This function lets you choose whether or not to save the current camera
settings after the power is turned off. The settings affected by [ALL
RESET] are listed below.
The [ALL RESET] setting applies to all the modes. When [ALL RESET] is
set to [OFF] in either shooting mode or playback mode, it applies to both
modes.
ON All settings are returned to the factory default settings after the power is
turned off.
OFF The settings made before the power is turned off are saved. Note that the
settings of each scene in f mode return to the default value.
Top menu [MODE MENU] [SETUP] [ALL RESET] [OFF] / [ON]
g“Using the menus” (P. 16)
(Functions that return to default settings when [ALL
RESET] is set [ON]
Note
• The functions on the mode menu setup tab ([ALL RESET], [W], [8], etc.)
are saved even when [ALL RESET] is set to [ON].
Function
Factory
default
setting
Ref.
Page
Function
Factory
default
setting
Ref.
Page
Flash AUTO P. 41 DRIVE o P. 52
&
/
%& OFF P. 40 ISO AUTO P. 53
BB OFF P. 43,
55
DIGITAL ZOOM
OFF
P. 39
F 0.0 P. 49 AF MODE SPOT P. 54
WB AUTO P. 50 R OFF P. 60
K HQ
P. 25
DISP
(Shooting mode)
Information
on screen
P. 61
ESP/5 ESP
P. 51
DISP
(Playback mode)
Information
off screen
P. 12
To Next Page
Loading...
