93
6
Settings
Setting the date and time in another time
zone (DUALTIME SETUP)
This function allows you to set a date and time in another time zone (dual
time), separate from the settings in [X]. After setting, you can switch
between the new setting and the time set in [X].
Top menu [MODE MENU] [SETUP] [DUALTIME SETUP]
g“Using the menus” (P. 16)
(Setting dual time
1 Select [ON], and press Y.
2 Press ON to set the year, and
press Y to move to the month
setting.
• To move back to the previous setting,
press X.
• The first two digits of the year are fixed.
• The date format is the same as that set
in Step 1 of [X].
3 Repeat this procedure until the
date and time are completely set.
• The time is displayed in the 24-hour format. Consequently, 2 p.m. is
displayed as 14:00.
4 Press Z.
• For a more accurate setting, press Z when the time signal hits 00 seconds.
• The date and time switches to dual time.
ALARM CLOCK
VIDEO OUT
DUALTIME SETUP
ON
OFF
SETUP
MEM CAM
2005
.
01
.
01
00
:
00
OK
DUALTIME SETUP
SELECT
GOSET