25
SZX16
b
Return the microscope body to the illumination light path by loosening
the focusing module clamping knob
b
, rotating the microscope body
gently in the direction of the arrow, aligning visually the objective with
the illumination light path and tightening the clamping knob
b
again.
Now the setting of the photo light path is complete.
2
4
Caution
· When transporting the microscope, do not hold it by the revolving nosepiece.
· The parfocal property when the objective is switched is not completely guaranteed.
· The SZX2-FO focusing assembly cannot be combined with this microscope.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
