EN 20
EN
Connecting to a camera’s underwater case
Connect the flash to the camera’s underwater case. Use the underwater
fiber optic cable (optional) for connection.
• Insert the plugs of the underwater fiber optic cable into the connectors
on the camera’s underwater case and on the flash’s fiber optic cable,
all the way in until the black rod of the connector to be inserted
completely.
• You can connect and disconnect the underwater fiber optic cable while
under water.
• For further details, refer to the instruction manuals of the underwater
fiber optic cable (optional) and the camera’s underwater case.
Underwater fiber optic cable
UFL-3_EN.book Page 20 Thursday, July 17, 2014 5:21 PM
To Next Page
Loading...
