31
Working ElementW7.074.651
NOTE!
When using the products listed below, make sure to follow
these instructions*:
When using the cable in combination with the HF unit
PK/SP, the HF unit automatically recognizes the product
and automatically applies appropriate settings. Check
the display and make sure that the correct setting PK/
TURis appears on the display. If the correct setting is not
displayed, disconnect the plug and try again.
Only insert the generator plug into the right-hand half of
the socket. Never connect two generator plugs at the same
time.
Do not pull the cable to disconnect the generator plug.
Always pull on the plug to avoid arcing.
*Applies to the following products:
WA22602D, WA22603D, WA22606D, WA22607D,
WA22621C, WA22623C, WA22632D, WA22651C,
WA22655C, WA22657C
4.2 Procedure
WARNING!
Risk of injury
To prevent burns caused by HF current, use conductive
irrigation uid (0.9 % NaCl) and conductive lubricant only.
To Next Page
