43
3
EN
Playback
Playback
1 Select a file that has a segment
you would like to play back
repeatedly, and start playback.
2 Press the
REC
( s ) button at the
position where you want to start
segment repeat playback.
• [ w ] flashes on the display.
How to begin segment repeat
playback
This function enables repeated playback of
part of the file being played.
• While [ w ] is flashing, you can fast
forward, rewind, or change the
playback speed in the same way as in
normal mode to find the end position
( ☞ P.41).
• If the recorder reaches the end of
the file while [ w ] is flashing, point
[ x ] becomes the end of the file, and
repeat playback starts.
3 Press the
REC
( s ) button again at
the position where you want to
end segment repeat playback.
• The recorder continuously plays back
the segment until segment repeat
playback is canceled.
Note
• As in normal playback mode, the
playback speed can be changed during
segment repeat playback as well ( ☞ P . 4 1 ) .
If an index mark or temp mark is set or
cleared during segment repeat playback,
segment repeat playback is canceled and
the recorder returns to normal playback
mode ( ☞ P.42).
REC
( s ) button
To Next Page
Loading...
Need help?
General
Weight and Dimensions
