OM SYSTEM DS-9100 - Basic Operations; Recording

2
17
EN
Recording
Basic operations
By default, the recorder has five folders, [a], [b],
[c], [d], [e]. These five folders can be selectively
used to distinguish the kind of recording. Up to 200
messages can be recorded per folder.
Record function
Before starting recording over a previously
recorded file, the RECORD function can be set to the
following:
• Append: Attaches the new recording to the end
of the previously recorded file (gP.18) .
• Overwrite (default): Overwrites and deletes part
of the previously recorded file starting from the
chosen position (gP.19).
• Insert: The recorded file will be inserted in the
middle of the previously recorded file, starting
from the chosen recording position. The original
file will be kept (gP. 2 0).
By default, the RECORD function is configured to
record using the overwrite option.
Recording will start from the current position of the
existing file.
NOTE
• Append recording, overwrite recording, and
insert recording are not available for MP3 files.
Recording
Recording related settings
Recording related settings can be configured
to provide a suitable recording environment.
• Hands-free recording (gP. 21).
• Recording monitor (gP. 21).
• Verbal Comment (gP. 29).
• Microphone mode [Mic mode] (gP. 33).
• Microphone sensitivity [Mic sense]
(gP.33).
• Recording modes [Rec mode] (gP.34).
• Using the Variable Control Voice Actuator
[VCVA] (gP.34).