OM SYSTEM DS-9100 - LCD; Sound Menu; Device Menu

35
3
EN
Menu items
Menu items
LCD/ Sound menu
Backlight
By default, the display will remain lit for about
10 seconds when a button on the recorder is
pressed.
1 Select [Lighting time], [Dim light time]
or [Brightness].
2 Select the options.
When [Lighting time] is selected:
[5 seconds] [10 seconds] [30 seconds]
[1minute] [2minutes] [5minutes]:
Set the backlight duration.
When [Dim light time] is selected:
[30 seconds] [1 minute] [2 minutes]
[5 minutes] [Always On]:
Set the time after which the backlight dims.
When [Brightness] is selected:
[01] [02] [03]:
Sets the brightness of the backlight when lit.
LED
You can set it so the record indicator light does not
turn on.
[On]:
LED light will be set.
[Off]:
LED light will be canceled.
Beep
When the Beep is set to other than [Off], the
recorder will beep in case of error.
[Volume 3] [Volume 2] [Volume 1]:
Beep is enabled. The higher the number is, the
louder the volume.
[Off]:
Beep is disabled.
Language
You can set the language for the recorder’s user
interface.
[Čeština] [Dansk] [Deutsch] [English] [Español]
[Français] [Italiano] [Nederlands] [Polski]
[Русский] [Svenska]
Device menu
Device Information
The currently set recording mode, microphone
sensitivity, and VCVA are indicated by icons, and
you can also check [Mic mode], [Internal memory],
[SD card] (when a SD card is inserted), [Model],
[Version], and [Serial No.].
Memory select
When there is a SD card (sold separately) in the voice
recorder, you can select whether to record on the
internal memory or on the SD card.
• The recording media ([
] or [ ]) will appear on
the display.