7.0 Dual Time Mode -Setting the Dual Time
Dual Time Mode
▪ This Watch includes a Dual Time Mode which tells user
another time when they travel overseas.
How to Set the Dual Time
▪ To select the setting display,hold the [M] button for 2
seconds in the Dual Time Display, and then the 'Minute'
digit will start flashing.
▪ In setting display, press the [M] button to move the
flashing following the adjacent diagram to select among
different settings.
▪ When ‘Hour’ or ‘Minute’ is flashing, press the[U] or [D]
button to increase or decrease the number (hold down
the button to change the number at a higher speed).
▪ When the setting is completed, hold the [M] button for 2
seconds to exit the setting display. If there is NO key-
stroke for 1minute, the Watch will also exit the setting
display automatically.
To Next Page
Loading...