4.2 Optional accessories
B-WIT 100 Wideband Injection Transformer & B-LFT 100 Low-
Frequency Injection Transformer
The B-WIT 100 and B-LFT 100 are used to inject signals into
control loops. Its main application are the stability analysis of
switched mode power supplies and linear voltage regulators.
B-WIT 100 order number: OL000151
B-LFT 100 order number: OL000169
PML-111O 10:1 Passive Probe
PML-111O is a passive 10:1 probe designed for the input stage of
Bode 100. It is manufactured by PMK in Germany and fits perfectly
to the Bode 100.
Order number: OL000110
B-WIC & B-SMC Impedance test fixtures
B-WIC and B-SMC extend the impedance measurement range
of Bode 100. They enable you to easily measure THT or SMD
components such as inductors and capacitors.
B-WIC order number: OL000152
B-SMC order numer: OL000153
B-AMP 12 Amplifier
12 dB amplifier to boost the output signal of Bode 100 for
applications where more than 13 dBm are needed.
Order number: OL000168
B-LCM Common Mode Choke
A low-frequency common mode choke to reduce ground-loop
errors in e.g. Shunt-Thru measurements.
Order number: OL000175
B-RFID Measurement Adapters
The B-RFID adapters allow standard compliant measurement of
the resonance frequency and Q-factor of RFID antennas.
Order numbers: OL000170-OL000173
For more information on the above mentioned Bode 100 accessories and recommended
accessories manufactured by partner companies visit www.omicron-lab.com.
Bode 100 and accessories
OMICRON Lab
11
To Next Page
Loading...
Need help?
General
