Need help?Do you have a question about the Omicron CT Analyzer and is the answer not in the manual?
General| Type | CT Analyzer |
|---|---|
| Measurement Categories | CAT III 300 V |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Primary Application | Testing and calibrating current transformers |
| Interface | USB, Ethernet |
| Standards | IEC 60044-1 |
| Voltage Range | 0 to 300 V |
| Accuracy | ±0.02% |
| Basic Accuracy | 0.02% (typical) |
Defines the necessary qualifications for personnel operating high-voltage power equipment.
Outlines compliance with relevant safety standards and basic safety rules for operation.
Provides safety instructions for setting up and operating the measurement environment for the CT Analyzer.
Details the requirements and specifications for connecting the CT Analyzer to the power supply.
Lists declarations of conformity with EU directives and FCC/Canadian regulations.
Describes the intended applications and functionality of the CT Analyzer for current transformer testing.
Details the specific applications and purpose of the CT SB2 switch box accessory.
Covers essential safety precautions for wiring and operating the CT Analyzer, including high voltage warnings.
Provides step-by-step instructions for physically setting up the CT Analyzer, including grounding.
Details the basic wiring procedures for connecting the CT Analyzer to perform a CT test.
Illustrates the connection setup for performing tests on multi-ratio CTs using the CT SB2.
Provides contact information and resources for obtaining 24/7 technical assistance for OMICRON products.
To Next Page
