Need help?Do you have a question about the Omicron C-Probe 1 and is the answer not in the manual?
General| Brand | Omicron |
|---|---|
| Model | C-Probe 1 |
| Category | Measuring Instruments |
| Language | English |
Symbols used to highlight sections of special interest or importance in the manual.
Rules for safe and proper use of the C-Probe 1, emphasizing adherence to regulations and awareness of dangers.
Crucial safety guidelines for operating the C-Probe 1, including voltage limits and wire handling.
Details the 12-month warranty period, its limitations, and the process for handling defective devices.
Provides detailed physical dimensions of the C-Probe 1, including jaw opening and overall size.
Lists general specifications such as dimensions, maximum wire diameter, cable length, and weight.
Details the current measurement ranges, accuracy across frequencies, and phase shift specifications.
Presents typical RMS noise levels at the output for different frequency bands and measurement ranges.
Explains factors that can influence measurement accuracy, such as wire position and temperature variations.
Describes the battery requirements, operating period, current consumption, and control indicator status.
Illustrates acceptable operating ranges for temperature and relative humidity, including reference and storage conditions.
Covers critical safety aspects including electrical, electromagnetic, and mechanical safety parameters.
Identifies and explains the various controls and indicators on the C-Probe 1, including the slide switch and indicators.
Explains the procedure for zero adjustment, necessary for accurate DC measurements, compensating for external fields.
Details the steps for performing current measurements using the C-Probe 1 and a test set, including connection and wire grasping.
Describes how to check the battery status via the indicator and when replacement is needed.
Provides a step-by-step guide for safely replacing the battery, including pre-replacement checks.
Advises on proper storage procedures, including battery removal to prevent damage.
Outlines recommended cleaning methods for the C-Probe 1, emphasizing safety precautions and material care.
Details procedures for service, repair, calibration, and contact information for complaints.
Lists the order description and corresponding order number for the C-Probe 1.
Refers to accuracy data diagrams, providing visual representation of measurement errors.
To Next Page
