Omicron C-Probe 1 User Manual

5
Preface
1 Preface
The purpose of this user manual is to familiarize the reader with the current
clamp C-Probe 1 and to describe its safe and proper use.
This manual should help you avoid danger, repair costs, and down-time
from improper operation in addition to maintaining the reliability and lifetime
of the C-Probe 1.
The user manual should be available at the site where C-Probe 1 is used. It
should be read and understood by all people working with C-Probe 1.
In addition to the operational procedures described in this user manual,
follow the specific safety regulations for accident prevention applicable in
the country and at the site where the C-Probe 1 is used.
1.1 Symbols
Various symbols are used to highlight certain sections of special interest
and/or importance in this manual.
These symbols are as follows:
Note
Refers to sections with high importance or additional
information.
Caution
Refers to sections of special safety relevance.
Reference information
Refers to references that contain more comprehensive and in-
depth information on the current subject.

Omicron C-Probe 1 Specifications

General

Brand	Omicron
Model	C-Probe 1
Category	Measuring Instruments
Language	English