25
Operating the CMGPS
4 Operating the CMGPS
Please check for the availability of all components prior to operating CMGPS.
For a detailed list of the components please refer to the packaging list.
Standard scope of supply comprises:
• CMGPS synchronization unit
• antenna
• antenna extension cable
• connection cable CMGPS
⇔ CMC
• power supply unit 100 - 240 V
AC
/18 V
DC
• CMGPS user manual.
The instructions for operating the CMGPS are based on the precondition that the
CMC test set has been operated in accordance with its manual and is ready for
use.
Operating the CMGPS is as follows:
• Connect the extension cable of the antenna to the CMGPS.
• Connect the antenna to the extension cable. Place the antenna at a
suitable position that provides sufficient open sky.
Do not position the antenna of the CMGPS in an exposed position above the
lightning rod or at another location endangered by lightning.
In addition, do not position the antenna within a control cabinet in the vicinity of
flashover-endangered spots.
To Next Page
Loading...
General