43
Appendix
8 Appendix
8.1 Ordering Information
Table 8-1:
Ordering information for
the CMGPS
synchronization (set)
Table 8-2:
Ordering information for
individual or optional
components
CMGPS synchronization unit Part no.
CMGPS synchronization unit set, consisting of
– CMGPS synchronization unit (see figure 3-1 on page 13)
– power supply unit 100 - 240 V
AC
/18 V
DC
, incl. plug-in
adapter for various country-specific wall outlets
– active antenna
– 15 m (50 ft) antenna cable
– 16-pole LEMO connection cable CMGPS
⇔ CMC test set
– carrying bag
VEHZ3000
Individual and optional components Part no.
Power supply unit 100 - 240 V
AC
/18 V
DC
, incl. plug-in adapter
for various country-specific wall outlets (see figure 3-2 on page
13)
VEHZ1103
Active antenna (see figure 3-4 on page 14) VEHZ3001
Cables:
– 16-pole LEMO connection cable CMGPS
⇔ CMC test set
(see figure 3-3 on page 14)
– 15 m (50 ft) antenna cable (see figure 3-5 on page 15)
– 2 × 20 m (2 x 60 ft) antenna extension cable and SMA
adapter for an extension of 40 m (see figure 3-6 on page 15).
Note: when connecting VEHZ3003, VEHK3002 cannot be
used anymore.
VEHK0003
VEHK3002
VEHZ3003
Reference manual for CMGPS VESD0200
CMGPS carrying bag VEHP0020
CMIRIG-B interface unit with all accessories VEHZ1150
CMIRIG-B interface unit without accessories VEHZ1151
Connection cable CMIRIG-B
⇔ CMC test set VEHK0003
CMIRIG-B Reference Manual VESD1150