Omni Bead Ruptor 24 - Page 9

9
CRYO 24 COOLING UNIT P/N 198010
It keeps samples cool before, after & during processing. Used with liquid nitrogen or dry
ice, it maintains a consistent temperature for heat sensitive samples. Compressed air
travels through a heat exchanger, where liquid nitrogen or dry ice cool the air prior to
moving it across the sample tubes. Works exclusively with the Bead Ruptor 24.
Descrip tion
P/N
Bead Ruptor Rack 19-604
The optional Bead Ruptor Rack simplifies the
tube loading process and enables storage of
loaded Tube Carriages before and after
processing down to –80°C.
BEAD RUPTOR RACK P/N 19604
The optional Bead Ruptor Rack simplies the tube loading process and enables storage
of loaded Tube Carriages before and after processing down to –80°C.
2 mL TUBE CARRIAGE FOR THE BEAD RUPTOR 24 (P/N 1901030902
Holds 24x2 mL or 0.5 mL tubes.
2 mL SNAP CAP TUBE CARRIAGE FOR THE BEAD RUPTOR 24 (P/N 1930902S
Holds 24x1.5 mL snap cap tubes
SECTION 2 — UNPACKING THE BEAD RUPTOR
2.4 ADDITIONAL ACCESSORIES (sold separately)
The BR-Cryo 24 is not compatible with 15ml, 30ml and the 50ml tube carriages