Omni Bead Ruptor 24 - Components; Additional Accessories

8
SECTION 2 — UNPACKING THE BEAD RUPTOR
2.3 COMPONENTS
Prior to operation, please remove all parts from the shipping container and inspect for damaged or missing
parts. If any parts are found to be damaged or mising, please contact Omni International at 800.776.4431.
DESCRIPTION QUANTITY P/N
Motor Drive Unit (115V or 220V) 1 19-011
Power Cables 1 LT710 (115V) and LT712 (220V)
Spare Fuse 1 00-193
Instruction Manual 1 03-231
Quick Start Guide 1 03-233
96 STRIP WELL TUBE CARRIAGE P/N 19010330
• Holds 96 x 1.2 mL strip well tubes
• Includes tube carriage that holds the 1.2 mL strip well tubes
rmly in place during processing.
1.5 mL MICROTUBE CARRIAGE KIT P/N 19010310S
• Holds 24 x 1.5 mL microtubes
• Includes the Bead Ruptor Finger Plate that holds the 1.5 mL microtubes
rmly in place during processing.
2 mL TUBE CARRIAGE KIT P/N 19010310
• Holds 24 x 2 mL or 24 x 0.5 mL skirted tubes
• Includes Bead Ruptor Finger Plate that holds the 2 mL tubes
rmly in place during processing.
7 mL TUBE CARRIAGE KIT P/N 19345007
• Holds 12 x 7 mL tubes
• Patent pending snap-in tube carriage for 7 mL samples. Kit includes tube
carriage and lock ring.
15 mL TUBE CARRIAGE KIT P/N 19345015
• Holds 3 x 15 mL tubes
• Patent pending snap-in tube carriage for 15 mL samples. Kit includes tube
carriage and lock ring.
30 mL TUBE CARRIAGE KIT P/N 19345035
• Holds 6 x 30 mL tubes
• Patent pending snap-in tube carriage for 30 mL samples.
Kit includes tube carriage and lock ring.
50 mL TUBE CARRIAGE KIT P/N 19345050
• Holds 3 x 50 mL tubes
• Patent pending snap-in tube carriage for 50 mL samples.
Kit includes tube carriage and lock ring.
2.4 ADDITIONAL ACCESSORIES (sold separately)